Slide Mounting Media
Enzo Life Sciences HIGHDEF Hematoxylin (100ml)
HIGHDEF Hematoxylin is intended for use in the histologic demonstration of nuclear staining. This staining technique is sometimes used to make the critical distinction between a normal nucleus and an abnormal one. Formulation: Enhancers added to improve signal. Long Term Storage: Ambient. Applications: IHC ISH (in situ hybridization).
Electron Microscopy Sciences EMS Shield Mount 100 ML
EMS Shield Mount is an aqueous non-permanent, low viscosity mounting medium for immunofluorescence and confocal microscopy. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine and Redox. The fluorescence is retained during storage at 4 degree C in the dark. This medium does not contain phenylenediamine, which destroys immunofluorescence of Cy dyes.
Electron Microscopy Sciences EMS CitraMount Mountant 500 ML
This butyl acetate and acrylic resin mixture is the first mounting medium developed for coverslipping directly from d-limonene based clearants. Superior results are also with xylene. CitraMount medium is recommended for manual coversliping only as it may cause damage to the valves of automated coverslippers. Clear seal has a drying time of less than 24 hours. Refractive index is 1.42 and Viscosity is 90 cP.
Electron Microscopy Sciences Technovit Medium 4000 Large Kit
Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together first and the powder is mixed in last. The color is white opaque.
Technovit 4000 is distinguished by its low shrinkage when polymerizing and its perfect margin fit. Due to its excellent flow characteristics, Technovit 4000 guaranteed that geometrically demanding samples are optimally embedded. Its excellent adhesion properties with regard to metal are a guarantee of gapless embedding of all metal samples. These properties are of particular importance when working with samples that require good edge definitions.
After mixing, Technovit 4000 can be used for casting for approximately 4 minutes and takes approximately 8 minutes to cure.
Electron Microscopy Sciences EMS-Mount 250 ML
EMS-Mount is a non-permanent, low viscosity an aqueous mounting medium designed for mounting of tissue sections and cell smears with peroxidase and alkaline phosphatase chromogens that cannot be dehydrated with organic solvents. This mounting medium preserves Fast red, Aminoethylycarbazole (AEC), BCIP/NBT, BCIP/INT chromogens and is also compatible with counterstain like Hematoxylin and Nuclear fast red (NFR). It is also suitable for chromogens like DAB and DAB with nickel and cobalt. (It is not compatible with H and E staining).
Application: Mounting of chromogens that cannot be dehydrated with organic solvents. Ready to use. Storage at 2-8 degree C is recommended.
Enzo Life Sciences Antifade mounting medium with DAPI (hardset) (10ml)
Antifade mounting medium with DAPI (hardset) is an antifade reagent that causes little or no quenching. Use of the mounting medium significantly extends the photobleaching half-life of the fluorescent stain. The inclusion of DAPI allows for staining of the nucleus. Long Term Storage: -80°C. Applications: IF, IHC, Fluorescence microscopy, Fluorescent detection .
Newcomer Supply PERMANENT MOUNTNG MEDIUM 125ML
Permanent Mounting medium preserves AEC DAB Fast Red and other dye chemistry stains. 125mlSets in 5 minutes at Room Temperature. Manufactured by Innovex Biosciences.
Electron Microscopy Sciences Fluoro-Gel with Anti-Fading Agent 100 ML
Fluoro-Gel Mounting Medium with a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula preserves rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 388, Alexa Fluoro 594 tetramethyly rhodamine, and Redox. The fluorescence is retained during prolong storage at 4 degree C in the dark.
This medium contains Phynylenediamine and is not suitable for immunofluorescence of Cy dyes, Phycoerythrin (R-PR) phycocyanin (PC), and allophycocyanin (APC). Prepared from TRIS buffer. Ready-to-use mounting medium with dark coffee color, this is normal, and does not interfere with immuno-fluorescence.
Storage in temperature of 2-8 degree C is recommended. Protect from light. DO NOT FREEZE.
MEDPAPER LLC URINE COLLECTOR COUNTER-TOP/WALL-MOUNT DISPENCER
Empty Refillable dispenser. Counter or Wall-mount.
Rowley Biochemical Institute Inc ACETIC ACID 0.2 AQUEOUS 1 QT
NC3432185 ACETIC ACID 0.2 AQUEOUS 1 QT
Electron Microscopy Sciences EUKITT Microfix Mounting Medium 500 ML
MICROFIX follows the proven, xylene-based approach of O. Kindler ORSAtec. It is characterized by fast curing, crystal-clear optics, low fluorescence, ideal refractive index, good flowability and low shrinkage. It is colorless and does not change shape, structure or color of the material to be examined. These characteristics are already known from the classic EUKITT. What is new is the streamlined and optimized synthesis and filling process, and a still further optimized selection of our raw materials.
Electron Microscopy Sciences Fluoro-Gel with Anti-Fading Agent 20 ML
Fluoro-Gel Mounting Medium with a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula preserves rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 388, Alexa Fluoro 594 tetramethyly rhodamine, and Redox. The fluorescence is retained during prolong storage at 4 degree C in the dark.
This medium contains Phynylenediamine and is not suitable for immunofluorescence of Cy dyes, Phycoerythrin (R-PR) phycocyanin (PC), and allophycocyanin (APC). Prepared from TRIS buffer. Ready-to-use mounting medium with dark coffee color, this is normal, and does not interfere with immuno-fluorescence.
Storage in temperature of 2-8 degree C is recommended. Protect from light. DO NOT FREEZE.
Electron Microscopy Sciences Mount Quick Water Base 30 ML
Mounting media for cover glass. It comes in a convenient dispensing tube or bottle. Solvent based which is soluble in xylene and has a 10 minute dry time. Its viscosity is 33 cps at 25 degree.